|
|
|
With
Auto Ro-Trak |
-
Adjustable plastic width from
3 ft wide to 5 ft wide plastic
-
Adjustable bed height from 5”
to 9” high bed
-
Special rolled bed formers
bring fine soil to center of bed where you plant
-
Adjustable tension brake on
plastic roll and drip roll carriers
-
Rear disc blades are fully
adjustable. Can be tilted up or down to knife into soil for
better coverage
-
Large independent press
wheels keep plastic in place
-
Bed press has adjustable side
press plates, for more or less plastic coverage
-
Spring loaded shovels on
side, help loosen soil for cover disk
-
Will carry 4000 ft long rolls
of plastic mulch
|
-
High speed dirt shields,
adjustable row markers, operator seat, and UHMW poly lined
bed press are standard features
-
Optional equipment:
drip irrigation attachment, fumigating attachment, crowned
bed and dry fertilizer, front disk.
|
|
Why raised beds |
-
Earlier Crops: Raised
beds will make you produce crop earlier due to warmer,
better drained soil
-
Cleaner Crops: Crops stay
off the ground and are easier to pick. Dirt is not rolled
onto plastic if between rows are cultivated
-
Prevent Erosion: Rows
should be laid with the field contour
-
Remove Plastic Fast:
Plastic pulls away easier from raised beds.
|
|
|
Requires 70 HP with 4
wheel drive or 80 HP with 2 wheel drive. |
|
|
|
 |
|
|
|
|
|
With
Auto Ro-Trak
The 2550 Raised Series II Bed Mulch Layer has most of the same features as
its bigger brother Model 2600 Series II.
The model 2550 Series II is an excellent machine for the small grower and
will probably set the standards of mulch layers in the future.
Its compact size can do 60” row centers. Requires 70-HP or 60-HP with
4-wheel drive. |
- Adjustable bed height 3” to 7”
- Will lay 3’ or 4’ plastic mulch
- Can be used to make beds without plastics
- Quick change on bed height adjustment.
|
- Adjustable tension brake on plastic and
drip tape roll carriers
- High speed dirt shields, adjustable row
markers, operator
seat, and UHMW poly lined bed press are standard features.
|
|
Optional Equipment 2550
Series II :
Drip irrigation attachment, Crowned bed, Dry fertilizer hopper,
and fumigating attachment, front disk.
Requires 70-HP or
60-HP with 4-wheel drive. |
|
|
|
 |
|
|
|
|
|
|
Stainless Steel Dry Fertilizer
Hopper
-
Approx. 400 pounds capacity
-
Ground Drive for consistent
fertilizer ow
-
Auger has speed selection for
proper amount of fertilizer per acre
-
Stainless steel fertilizer hopper
|
 |
|
Fumigating
Attachment
Includes:
- Two or three fumigating knives mounted on
front.
- Tank holders for two fumigation tanks and
one nitrogen tank.
- Mounts on model 2550 and 2600
|
 |
|
|
|
|
|
|
|
 |
|
FEATURES |
OPTIONS |
- Will lay 4’ plastic with 58” row spacing
- Adjustable 3” to 5” bed height
- Requires minimum 40-hp with 4-wheel
drive
- 50 Gal Water tank to adjust weight to
match tractor size
- Compact machine for high tunnels
- Adjustable tension break on plastic roll
carriers
- Replaceable, reversible plow share
- 3/8” & 1/2” UHMW poly lined bed press
- Category I, 3-point hitch.
|
- Optional double or single drip applicator
- Optional center fillers for heavy soils.
|
|
|
|
|
|
|
|
The Model
345 Series II Flat Bed Mulch Layer will lay 3’ , 4’ or 5’ plastic. |
This machine has an independent leveling blade
that floats, and a bed press. The specially designed leveling
blade does
an excellent job in leveling uneven soil. Eliminating low spots in
the beds that fill with water. Trench openers are behind
the bed press so soil can move away to make the trench.
- Has extra roll carrier
- Big independent press wheels keep
plastic in trench.
|
- Full open back for fast reloading
- 16” cover disk with high speed
shields
- Compact machine has cat. #I 3-point
hitch.
|
- Has adjustable row markers
- Drip irrigation attachment is
optional
- Approximate tractor size 35 to 60 HP
|
|
 |
 |
|
 |
|
|
Robert
Marvel
